液壓剪 Hydraulic shear

       鱷魚剪即鱷魚式剪切機，是金屬剪切機的一種。
       鱷魚剪適用于金屬回收公司、廢鋼廠、冶煉鑄造企業(yè)對各種形狀的型鋼及各種金屬結構進行冷剪切采用液壓驅動，操作方便，維修簡單。
       工作刀口長度:400mm，600mm700mm800mm1000mm1200mm,剪切力從63噸至400噸共8個等級。700mm以上刀口的剪切機，特別適用于剪切報廢汽車。
       安裝無須底腳螺絲，無電源的地方可用柴油機作動力。
       設備采用液壓傳動，與機械傳動式剪斷機相比，具有體積小、重量輕、慣性小、噪音低、動作平穩(wěn)、操作方便、靈活、剪切斷面大、剪刀口調整方便等優(yōu)點，操作使用*，易于實現(xiàn)過載保護。

       Crocodile shear is crocodile shear machine, is a kind of metal shear machine.
       Crocodile shear is suitable for metal recovery companies, scrap steel plants, smelting and casting enterprises for cold shear of various shapes of steel and various metal structures using hydraulic drive, easy to operate, simple maintenance.
       Blade length: 400 mm, 600 mm700mm800mm1000mm1200mm, shear force from 63 tons to 400 tons, a total of eight grades. Shear machine with knife edge above 700mm, especially suitable for cutting scrapped cars.
       Installation without foot screws, where no power can be used for diesel engine power.
       The equipment adopts hydraulic transmission, compared with the mechanical transmission type shearing machine, has the advantages of small volume, light weight, small inertia, low noise, smooth action, easy operation, flexible, large shear section, convenient adjustment of scissors mouth, etc., safe operation and use, easy to realize overload protection.